Lightweight USB Framework for AVRs (LUFA)

December 8, 2009

Lately I’ve been killing off course requirements by taking project based courses.  Happily, Bart Massey offered a Linux device driver course that gave me an opportunity to get my hands dirty in the embedded world again.  The project was to make an AVR based USB gadget do something… anything.  Most prior experience with µCs was with Rabbits – a fitting name seeing as the useful and higher level libraries seemed to multiply like rabbits.  Unfortunately, the AVRs didn’t have any apparent high level library for USB; many of the examples used commented byte arrays as USB descriptors.  While understandable, this feels harder to debug, ugly, and just generally wrong.  Enter LUFA.


LUFA is a high-level USB library for AVRs generously released under MIT.  It has considerable documentation, but no real guide stating what the bare-minimum functions are for any new/custom gadget – this is my attempt at providing such a guide.  After you verify your AVR is supported by LUFA go ahead and download LUFA to an includes directory for your project.  All code here is made possible by LUFA and its included examples – I’ll only claim to being the original author of any and all bugs.

My Device

Before going any further you should have an understanding of what your device will do, how many and what type of  USB endpoints it will use (BULK, INTERRUPT, CONTROL, ISOCRONOUS), and what driver will support it.  If you are making something that will use a generic driver, such as a HID, then you probably can stop here as there is plenty of code for you to use – this post is aimed at people making custom devices.

I’m using a Teensy 2.0 with three bulk interfaces (two OUT one IN).  One OUT provides commands to the gadget, which will change its state.  Another OUT will send jobs to the gadget and the final IN will read the results of those jobs.  This requires a custom driver which I and several other folks developed for course work.

The Makefile

Its probably safe for you to rip-off one of the makefiles from an example in LUFA/Demo/Devices/LowLevel/.  Noitice several of the defines change the API, defines I used for this post/project include:

 -DUSB_DEVICE_ONLY             # Saves space if you only need gadget-side code
 -DNO_STREAM_CALLBACKS         # Changes the API to exclude any callbacks on streams
 -DINTERRUPT_CONTROL_ENDPOINT  # So you don't have to call USB_USBTask() manually on a regular basis
 -DUSE_FLASH_DESCRIPTORS       # Save RAM, leave these in the Flash

EDIT: All the makefiles I’ve seen are broken, they don’t properly track dependencies, so either fix that or be sure to ‘make clean’ prior to each build.


When your gadget is plugged in its going to have to enumerate its interfaces by sending descriptors to the host.  Start by declaring a global USB_Descriptor_Device_t along with Language, Manufacturer and Product structures:

USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
 .Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},

 .USBSpecification       = VERSION_BCD(01.10),
 .Class                  = 0xff,
 .SubClass               = 0xaa,
 .Protocol               = 0x00,

 .Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,

 .VendorID               = 0x16c0,
 .ProductID              = 0x0478,
 .ReleaseNumber          = 0x0000,

 .ManufacturerStrIndex   = 0x01,
 .ProductStrIndex        = 0x02,
 .SerialNumStrIndex      = USE_INTERNAL_SERIAL,

 .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS

USB_Descriptor_String_t PROGMEM LanguageString =
 .Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
 .UnicodeString          = {LANGUAGE_ID_ENG}

USB_Descriptor_String_t PROGMEM ManufacturerString =
 .Header                 = {.Size = USB_STRING_LEN(3), .Type = DTYPE_String},
 .UnicodeString          = L"JRT"

USB_Descriptor_String_t PROGMEM ProductString =
 .Header                 = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},
 .UnicodeString          = L"Micro Storage"

You’ll also need a descriptor that enumerates your interfaces and endpoints.  Seeing as this is specific to your project, and C is a significantly limited language, you’ll need to make a quick structure declaration then fill that structure:

typedef struct {
 USB_Descriptor_Configuration_Header_t Config;
 USB_Descriptor_Interface_t            Interface;
 USB_Descriptor_Endpoint_t             DataInEndpoint;
 USB_Descriptor_Endpoint_t             DataOutEndpoint;
 USB_Descriptor_Endpoint_t             CommandEndpoint;
} USB_Descriptor_Configuration_t;

USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 .Config =
 .Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},

 .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
 .TotalInterfaces        = 1,

 .ConfigurationNumber    = 1,
 .ConfigurationStrIndex  = NO_DESCRIPTOR,

 .ConfigAttributes       = USB_CONFIG_ATTR_BUSPOWERED,

 .MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)

 .Interface =
 .Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},

 .InterfaceNumber        = 0,
 .AlternateSetting       = 0,
 .TotalEndpoints         = 3,

 .Class                  = 0xff,
 .SubClass               = 0xaa,
 .Protocol               = 0x0,

 .InterfaceStrIndex      = NO_DESCRIPTOR

 .DataInEndpoint =
 .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},

 .EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | BULK_IN_EPNUM),
 .EndpointSize           = BULK_IN_EPSIZE,
 .PollingIntervalMS      = 0x00

 .DataOutEndpoint =
 .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},

 .EndpointSize           = BULK_OUT_EPSIZE,
 .PollingIntervalMS      = 0x00

 .CommandEndpoint =
 .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},

 .EndpointSize           = COMMAND_EPSIZE,
 .PollingIntervalMS      = 0x00


So now you see I have a device with a single interface and three bulk endpoints (two OUT and one IN).  Remember, in USB terminology OUT means from the HOST to the GADGET while IN means from the GADGET to the HOST.  While there is a direction to these channels, USB 1.0 and 2.0 BULK communications start with the host sending a message to the device (i.e. IN endpoints are polled) and the device should always respond.  Now that we have descriptors lets be sure to send them when the host tries to enumerate the device.

uint16_t CALLBACK_USB_GetDescriptor
   (const uint16_t wValue,
    const uint8_t  wIndex,
    void **const   DescriptorAddress)
    const uint8_t  DescriptorType   = (wValue >> 8);
    const uint8_t  DescriptorNumber = (wValue & 0xFF);

    void*    Address = NULL;
    uint16_t Size    = NO_DESCRIPTOR;

    switch (DescriptorType) {
        case DTYPE_Device:
            Address = (void*)&DeviceDescriptor;
            Size    = sizeof(USB_Descriptor_Device_t);
        case DTYPE_Configuration:
            Address = (void*)&ConfigurationDescriptor;
            Size    = sizeof(USB_Descriptor_Configuration_t);
        case DTYPE_String:
            switch (DescriptorNumber) {
                case 0x00:
                    Address = (void*)&LanguageString;
                    Size    = pgm_read_byte(&LanguageString.Header.Size);
                case 0x01:
                    Address = (void*)&ManufacturerString;
                    Size    = pgm_read_byte(&ManufacturerString.Header.Size);
                case 0x02:
                    Address = (void*)&ProductString;
                    Size    = pgm_read_byte(&ProductString.Header.Size);

    *DescriptorAddress = Address;
    return Size;

With this, and calling USB_Init() when your device starts up, you should have a gadget that is properly enumerated by the matching driver.  Once a configuration is selected we need to configure the endpoints, but after that we can finally send and receive data!

void EVENT_USB_Device_ConfigurationChanged(void)
    int i,succ=1;

    succ &= Endpoint_ConfigureEndpoint(BULK_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
                                       BULK_IN_EPSIZE, ENDPOINT_BANK_SINGLE);

    succ &= Endpoint_ConfigureEndpoint(BULK_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
                                       BULK_OUT_EPSIZE, ENDPOINT_BANK_SINGLE);

    succ &= Endpoint_ConfigureEndpoint(COMMAND_EPNUM, EP_TYPE_BULK,
                                       ENDPOINT_DIR_OUT, COMMAND_EPSIZE,
    while(!succ) {
    for(i = 0; i < 5; i ++) {

Now to handle any data on the endpoints, you’ll probably want to tight loop around code that checks each endpoint, reads data, and performs some action:

    if (USB_DeviceState != DEVICE_STATE_Configured)

    if (Endpoint_IsConfigured() && Endpoint_IsINReady() && Endpoint_IsReadWriteAllowed()) {
        do_something(state, data, &len);
        err = Endpoint_Write_Stream_LE((void *)data, len);
        // FIXME handle err

    if (Endpoint_IsConfigured() && Endpoint_IsOUTReceived() && Endpoint_IsReadWriteAllowed()) {
       err = Endpoint_Read_Stream_LE(data, len);
       do_other_thing(data, len);

    if (Endpoint_IsConfigured() && Endpoint_IsOUTReceived() && Endpoint_IsReadWriteAllowed()) {
        usb_cmd_t cmd;
        err = Endpoint_Read_Stream_LE(&cmd, sizeof(usb_cmd_t));

And that’s the whole deal. Some things to take note of:

1) I don’t know why I needed Endpoint_ResetFIFO() – my results lagged by one message without them but I feel certain this is not the correct way to fix the issue. Perhaps I need to reset the endpoints some time after configuration and before use, but I’m not sure which callback to use for that, if that’s the case.

2) C needs phantom types.  Many of these functions aren’t intended for use with CONTROL endpoints.  See the LUFA documentation for which functions to use if you have non-BULK endpoints.

3) Be sure to number your ENDPOINTS starting at 1 (the *_EPNUM values).  I’ve seen unusual behavior when numbering started higher – not sure if that was against standards or not.


At a minimum, you must declare a “USB_Descriptor_Device_t” variable, three “USB_Descriptor_String_t” variables (Language, Manufacturer, Product), a custom “USB_Descriptor_Configuration_t” structure and variable.  Also declare a function named “CALLBACK_USB_GetDescriptor” and one called “EVENT_USB_Device_ConfigurationChanged(void)” which calls
“Endpoint_ConfigureEndpoint(*_EPNUM, EP_TYPE_{BULK, INT, CONTROL, ISOC}, ENDPOINT_DIR_{IN,OUT}, *_EPSIZE, ENDPOINT_BANK_{DOUBLE,SINGLE});” for each endpoint in the configuration. Finally use “Endpoint_SelectEndpoint(*_EPNUM)” followed by “Endpoint_Is{INReady,OutReceived}() && Endpoint_IsReadWriteAllowed()” to select an endpoint and check for data. Finish all this by reading your stream “Endpoint_Read_Stream_LE(buf, len)” and issue a call to “Endpoint_Clear{IN,OUT}()” when done.

2 Responses to “Lightweight USB Framework for AVRs (LUFA)”

  1. Dean Says:

    Hi Tom!

    Excellent rundown of my library – you make a good point, I do need to write some proper tutorials on how to use it. Some notes on what you have above:

    1) LUFA is actually released under the MIT license, not GPL. MIT is less restrictive in that you can keep your code closed source, so long as you mention in your product documentation that it uses LUFA. Companies can opt out of doing even that via a one-time US$1500 fee.

    2) Don’t call Endpoint_ResetFIFO() on the endpoints. Rather, call Endpoint_ClearIN() after writing to send the packet or call Endpoint_ClearOUT() after reading. This is still required for stream read/writes, as it allows you to call the stream functions multiple times on the same packet to read or write data in chunks as you create or consume it, all on the same packet.

    – Dean

  2. tommd Says:

    Thanks for the response. I fixed the GPL/MIT mixup, but am still confused on the EndpointResetFIFO() – I do call Endpoint_Clear{IN,OUT}() as shown above. Even calling these clear functions I get results lagging 1 exchange behind. I’ll look more on it later and update the blog post with what I’m messing up if I hunt it down.

Comments are closed.


Get every new post delivered to your Inbox.

%d bloggers like this: